How to replace window snap-in glazing
Replacing snap-in glazing in a window
Hey it's Mike from SWISCO.com and today I am going to show you how to remove and replace your existing vinyl snap-in the only tool you need for this exercise is a flat head screw driver and for safety I'll be wearing 75-078 safety glasses and wearing the 75-073 cut resistant gloves we're going to begin the tutorial at one of the top corners of the window frame where
the snap-in is a bit shorter notice the snap-in overlaps here at the corners take your flathead screwdriver and tuck it underneath one of the corners slide it through to the opposite corner and this should knock out the snap-in, lets take it out and flip it over to the other side alright same thing with the other side, lets tuck in the flat head screwdriver and drag it through to the corner and
remove this portion of the snap in and pull it out and lets rotate and do the sides of the window frame allright same thing for the sides, we are just going to take the flat head in here and run it along the edge and remove this portion and lets repeat this step for the last side of the window frame and remove the last piece of the snap-in after we remove
the old snap-in we are going carefully remove the old glass from the window frame lift up one end of the frame and with one hand gently push up the piece glass so you can secure it with the opposite hand make sure you keep your old glass handy so you can take it to your...
See more here: https://www.youtube.com/watch?v=PctXx3-u5To