How To Install An Aluminium Window - DIY At Bunnings
Step by step process of performing aluminum window installation in your home
I'm going to show you how to install an aluminum windows. The tools we need: safety equipment, a drill, a spirit level, a set square, hammer, some fixings, and a tape measure. And of course we need some packers and an aluminum window. The aluminum window that we're going to use is made to measure and already has it's flashing attached. The first thing we need to
do is make sure that the hole we've prepared is going to fit the aluminum window. So now I'm just going to double check my measurements, check the height of the window, and I'm also going to check the length of the window. And now I'm just going to check the opening size. Measurements are perfect. Now we're going to lift the aluminum window into position. I'm going to have
a hand from two teammates, one to stop the window from coming through, and one to help me lift the window into position. Now that the window's in position, now we need to level the bottom and then fix to the sides. A little handy tip, instead of lifting the whole window up, place a packer under the level, to determine the level before we put the window in place.
I can now put that packer underneath the reveal. The next step is to make sure the window is flush with the inside wall lining. To do this I'm going to use a set square. Now the window's level with the lining. That will help us with the architrave. Now I'm going to pre-drill three...
See more here: https://www.youtube.com/watch?v=cUkwbxPrEq8