Andersen 400S Tilt-Wash Double-Hung Insert Replacement Windows Install - Part 4of5

Video Description

step 3 removing your old window before starting make sure you have the following tools and read the installation guide completely prior to removing your old window measure your new window to make sure it will fit the new window should be three eighths of an inch narrower than the opening width and one-quarter of an inch shorter than the opening height to allow for installation clearance if your window needs staining you may

find it easier to apply stain before installation which is what we did with this window it's stained and ready to be installed the first step in removal is to take out the old stops and sash the stops which keep the sash in place can be saved and then reapplied later if you have an old window that has cords or chains you will need to cut them before you remove the sash then remove

the inside stops once removed set them aside to reuse later now remove the top sash finally remove any pulleys and weights if they're present and insulate the wait pockets and pulley openings with fiberglass insulation then reapply the wait pocket covers you you

See more here: https://www.youtube.com/watch?v=12-ZrGKmJrk

Video Descriptionstep 3 removing your old window before starting make sure you have the following tools and read the installation guide completely prior to removing your old window measure your new window to make sure it will fit the new window should be three eighths of an inch narrower than the opening width and one-quarter of an inch shorter than the opening height to allow for installation...