Aluminum Fascia Panel Installation

Video Description

okay so we went ahead and installed all of our vented soffit along this run here we got to the end and a full piece didn't fit so we just went ahead and trimmed it to length using a pair of tin snips and then installed that last piece so now we're ready to go ahead and install aluminum fascia here it's a pretty simple product it's just a piece of

aluminum with some wood grain on it and then it has the bottom edge here which is going to come down and under and finish off our rough edge of Safa here so this is a pretty simple product basically it's just going to come up right here it's going to get pushed up underneath our drip edge here nice and tight and then we're going to be able to nail it underneath here and

this is why when we took that time to position our screws right out to the outside edge of that fascia board there now when we come in here we can Center our nail on this nailing flange here and we can be sure to not hit that screw so it's just going to be a little bit easier for us here when we start nailing so what we can do here is we could

go ahead and install this but kind of thinking ahead here we're going to be wrapping around the corner here and finishing off our soffit box so it's a good idea to be able to do that all in one piece that way you don't have any cut edges and any holes in your fascia for any water or...

See more here: https://www.youtube.com/watch?v=0Ask8b8Hbv4

Video Descriptionokay so we went ahead and installed all of our vented soffit along this run here we got to the end and a full piece didn't fit so we just went ahead and trimmed it to length using a pair of tin snips and then installed that last piece so now we're ready to go ahead and i...